top of page

DW-CE

Close-Coupled Complete Pump with special Motor

DW-CE

Application


The pumps are suitable for transporting clean water and light corrosive liquid, glycol solution and other liquid which must be allowed by dealer. The pumps can be applied on industrial applications, domestic, washing, pool and irrigation etc.

Performance Limits
- Liquid temperature: 15°C~+80°C
- Max. Working pressure: 8 bar
- This pump can be used at full head without overloading motor

Pump Specifications


  • Type of liquid: Clean water

  • Max temp.: 90°C

  • Max. working pressure: 8 bar

  • Impeller: Open centrifugal type

  • Shaft seal type: Mechanical seal

  • Bearing: Sealed ball bearing

  • Suction: G2

  • Discharge: G2

  • Materials

    • Casing: AISI 304

    • Impeller: AISI 304

    • Casing cover: AISI 304

    • Shaft seal: Ceramic/Carbon/NBR

    • Shaft: AISI 304 (part in contact with liquid)

    • Bracket: Aluminium


Motor Specifications


  • Type: Single phase

  • No. of poles: 2

  • Synchronous speed: 3000 min-1

  • Insulation class: F

  • Protection degree: IP55

  • Power rating: 1.1 ÷ 1.5 kW, 1.5 ÷ 2 HP

  • Frequency: 50Hz

  • Voltage: 230 ± 10% V

  • Capacitor: Built in

  • Over load protection: Built in

  • Casing material: Aluminium

  • Base material/motor support: Aluminium

bottom of page